top of page

Cost to Install an EV Charger at Home in Sacramento

Nov 6
7 min read
cost to install ev charger at home

Thinking about an electric car, or already driving one and tired of slow charging? This guide explains what goes into the cost to install an EV charger at home, from the charger itself to wiring, permits, and panel work. You'll also see which Sacramento-area rebates may lower your price and how to get an accurate quote.


Level 1 vs. Level 2: Two Different Price Tags


Your first choice is the type of charging, and it shapes your whole budget.


Level 1 charging uses the cord that comes with most EVs. It plugs into a standard 120-volt outlet, so it often costs nothing extra if you already have an outlet near where you park. The catch is speed. Level 1 adds only a few miles of range per hour, which works best for short daily drives.


Level 2 charging runs on 240 volts, the same kind of power an electric clothes dryer uses. It needs a dedicated circuit (a line from your panel that powers only the charger) installed by a licensed electrician, but it can refill most EVs overnight. When homeowners ask about the cost to install an EV charger at home, this is almost always what they mean.


For a rough sense of hardware prices, the U.S. Department of Energy's overview of charging equipment and installation costs says residential Level 1 equipment can cost $0 if you only need the cord that came with your car, or up to $900 with extra equipment, while a Level 2 charger alone runs about $380 to $690 before installation.


Those figures come from a Rocky Mountain Institute report that is now several years old, and prices for today's models vary by brand, power level, and features. Check current prices before you set a budget.


What Goes Into the Total Installation Cost


The charger is only one part of the bill. The Department of Energy notes that labor is the largest expense in a typical installation. Here's what a complete quote should cover:


  • The charger: Basic models simply charge your car. Smart models add app control, scheduling, and energy tracking, and they usually cost more.

  • Wiring and labor: This includes a new 240-volt circuit, a breaker (the safety switch in your panel), wire, and conduit (protective tubing for the wire) running from your electrical panel to your parking spot.

  • Permit and inspection: Your city or county will likely require an electrical permit for a new charging circuit. Fees vary by location, and a good installer pulls the permit for you.

  • Panel work, if needed: If your panel lacks the space or capacity for a new circuit, you may need a panel upgrade or a load management device (a gadget that keeps the charger and your other appliances from overloading the panel). This is often the biggest swing factor in a quote.


Because every home is different, be careful with any flat price given before someone looks at your panel. Two neighbors on the same street can get very different quotes for good reasons.


Factors That Raise or Lower Your Price


These are the details that move the price the most.


Distance from the panel to your car


The farther your parking spot is from your electrical panel, the more wire, conduit, and labor the job needs. A charger mounted on a garage wall right next to the panel is the simplest case.


Your panel's capacity

A Level 2 charger draws a lot of power, often for hours at a time. Many older homes have smaller panels or no open breaker slots. An electrician can check whether your panel can handle the charger as it is.

The charger's power level


Chargers with a higher amp rating (how much electric current they draw) charge faster but need thicker wire and a larger breaker. Many chargers can be set to a lower amp level, which may let you skip a panel upgrade. Your car may not accept the fastest setting anyway, so match the charger to your vehicle.


Plug-in vs. hardwired


Some chargers plug into a 240-volt outlet, while others are wired directly to the circuit. Plug-in models are easier to swap out later, but chargers set above 40 amps need to be hardwired. Your installer can confirm which fits your charger and your plans.


Indoor vs. outdoor installs


Outdoor charging is safe when the charger and wiring are rated for outdoor use. A detached garage or a spot across the driveway may require digging a trench to bury the wiring, which adds cost.


Load management devices


Circuit-sharing and energy management devices are two common types of load management device, and they can sometimes help you avoid a costly panel upgrade. Both SMUD and PG&E include approved devices like these in their rebate programs.


cost to install ev charger at home

Rebates and Credits in the Sacramento Area


Rebates can take a real bite out of your cost, but they depend on your utility and change often. Always confirm current details before you plan around a specific number.


SMUD Charge@Home


SMUD customers can get rebates of up to $600 toward EV charging equipment and circuit installation through the SMUD Charge@Home program. Buying a charger yourself qualifies for up to $100 (plus up to $200 for a circuit-sharing device). The installation incentive is available only when a SMUD Contractor Network electrician does the work.


You can apply after buying a qualifying charger or hire an electrician from the SMUD Contractor Network to handle the rebate for you. Customers on SMUD's Energy Assistance Program Rate (its income-qualified discount) may qualify for a separate income-based option, so ask SMUD what's currently offered.


PG&E Residential EV Charging rebate


PG&E customers who own or lease an eligible EV can apply for the PG&E Residential EV Charging rebate. The standard option may cover up to 50% of the purchase price of approved charging equipment. 


Income-qualified households may get up to $2,000 for a charger install, or up to $5,000 when a panel upgrade is also needed. These households must be preapproved before work starts, and the job must be done by a contractor from PG&E's Trade Ally Network.


PG&E rebates are first-come, first-served and limited to one per household. A licensed California electrician must do the installation.


Other local utilities


If your home is served by a different utility, such as Roseville Electric, check its website for current EV programs.


The federal tax credit has ended


The federal Alternative Fuel Vehicle Refueling Property Credit used to cover 30% of home charger costs, up to $1,000, for homes in eligible low-income or non-urban census tracts. Under the One Big Beautiful Bill Act, signed in July 2025, it can't be claimed for chargers installed and in use after June 30, 2026. If your charger was installed and in use on or before June 30, 2026, ask a tax professional whether you can still claim it.


What It Costs to Charge Once It's Installed


The install is a one-time cost. Your ongoing cost depends on your rate plan and the hours you charge.


  • SMUD customers: SMUD's Time-of-Day rate charges the most on weekdays from 5 to 8 p.m. Midnight to 6 a.m. is the cheapest window year-round, since SMUD gives EV owners an extra 1.5¢/kWh discount then. In summer, 8 p.m. to midnight is still mid-peak.

  • PG&E customers: PG&E offers rate plans that EV drivers can choose, including EV2-A (time-of-use pricing for your whole home), EV-B (a second meter just for your charger), and E-ELEC (PG&E's Electric Home Rate Plan). Compare them against your household's usage before switching.

  • Scheduling: Most Level 2 chargers and many EVs let you set charging to start during off-peak (lower-price) hours automatically.


Pairing your charger with solar


If you have or plan a home solar system, charging your EV with power from your own panels can lower your cost per mile. Under PG&E's current solar billing plan (the Net Billing Tariff) and SMUD's separate Solar and Storage Rate, extra solar you send to the grid is usually credited at less than what you pay for utility power.


That makes using your own solar, including for EV charging, more attractive.

Many EVs sit in a workplace parking lot during peak sun hours, so they can't charge from your panels then. Adding battery storage lets you save daytime solar for evening use. How much this helps depends on your utility and rate plan, so ask for numbers based on your actual usage.


How to Choose an Installer


The quality of the wiring matters for your safety. The job should meet electrical code, pass inspection, and be done by a licensed electrician. To qualify for PG&E's rebate, the work must be done by a licensed California electrician.


At Solectric, our EV charger installation work is done by our own licensed, in-house crews, not subcontractors. We rank in the top 1% of California licensed contractors, according to BuildZoom, and have completed more than 3,600 (solar, battery, and EV charger) installs across the Sacramento region. As Daniel Navarrete, founder of Solectric, puts it:


"I spent 18 years working for other solar companies and grew tired of the way they did things: install, take the customer's money, and leave. When I founded Solectric in 2015, I built it around strong customer relationships and clean, high-quality installations."


Whoever you hire, ask these questions when you compare quotes:

  • Does the price include the permit and inspection?

  • Did you check my panel's capacity in person?

  • Will you help with the rebate paperwork?

  • What warranty do you offer on your workmanship?


Get an Accurate Quote for Your Home


The cost to install an EV charger at home comes down to your panel, your parking spot, and the rebates you qualify for. The only way to know your real number is an on-site look from a licensed electrician.


If you live in Sacramento, Elk Grove, Roseville, Folsom, Davis, or a nearby community, Solectric can check your panel, explain your options, and point you to rebates that may apply. Request your free, no-pressure quote or call us at (916) 719-0074.

Comments


bottom of page